Functional Requirements
Vehicle-mounted phased array antenna
Remote terminal control: Enables control of Party A's system computer
Keyword:
control
antenna
Category:
Other Custom Categories
Product Attachments:
E-mail :
Vehicle-mounted phased array antenna
Graphic Details
a. Operating modes: remote control positioning (guided tracking), unidirectional rotation, etc. (parameters such as position, speed, scanning can be set), preset positioning, sector scanning;
b. Control methods: all related equipment in the servo turntable should have remote terminal control, hand control box, and fully manual (maintenance mode) control methods:
Remote terminal control: can be controlled by Party A's system computer;
Hand control box control: controlled by a wired hand control box (provided by Party B), cable interface does not rotate with the turntable;
Fully manual (maintenance mode): supports manual operation when the entire system is powered off, easy to operate, reliable positioning;
After powering on, all equipment defaults to remote control function, with priority logic among its own controls;
c. Display requirements: all related equipment in the servo turntable should have hand control box display and terminal display (Party A's system computer display, servo control interface software provided according to Party A's requirements).
Display content includes the working status of the servo turntable and important parameters such as information faults.
d. Servo turntable deployment and retraction methods:
Remote control method: can automatically complete deployment based on preset parameters (tentatively, the rear of the vehicle is azimuth 0°, pitch 0° when the array normal is parallel to the ground); retraction process is from any working state to a state ready for vehicle departure;
Remote control method: controlled by hand control box jog mode, azimuth and pitch parts have forward and reverse rotation functions, speed adjustable, hand control box equipped with emergency stop switch. Hand control box interface fixed in position (does not rotate with the turntable);
Manual method: has manual operation retraction function;
e. Limit protection: soft limits, switch preset positions, etc.;
f. Communication functions: supports network and serial RS422 communication control capabilities;
g. The front main antenna mounting frame on the antenna array surface has deployment and retraction functions, with a deployment angle of 90°;
h. The back lobe antenna mounting platform on the back of the antenna array surface has deployment and retraction functions. When retracted, the two back lobe antennas are parallel to the antenna array surface; when deployed, the back lobe antenna beam direction forms a 65° angle with the antenna array surface (i.e., antenna rotates 65°);
i. Slip ring: the bottom of the turntable is equipped with a rotary assembly integrating electrical slip ring, control slip ring, optical fiber slip ring, and water joint.
j. Positioning and timing functions: after system deployment, timing and positioning information is provided by the system's Beidou dual-mode differential equipment; subsequent servo turntable operations use this data as a reference. During operation, calibration can be performed using system timing and positioning information. Automatic correction of carrier platform tilt angle via built-in inclinometer;
k. Self-check function: the servo turntable should have self-check capability, can locate fault positions, and report self-check information and real-time status to Party A's system;
l. Fault alarm: has fault alarm functions for hand control box and remote control; faults include but are not limited to motor faults, motor overload, motor power phase loss or reversal;
m. Equipment installation requirements: meet Party A's equipment installation needs, reasonable layout, fully fixed and protected, while considering related installation, maintenance structures and facilities, ensuring easy disassembly and maintenance of equipment and cables; cable connections between equipment consider electromagnetic shielding; Party A provides relevant equipment dimensions, interfaces, weight, installation requirements, wiring requirements, etc. (if not provided, incomplete, or not involved in the agreement, Party A will communicate via fax, email, meeting minutes, etc., equivalent to design input), Party B cooperates in corresponding design, facilitating installation and maintenance; for some Party A equipment requiring communication and confirmation of related dimensions and interfaces after Party B's design, Party B is responsible for providing relevant requirements; during system integration, Party B is responsible for installing equipment designated by Party A (e.g., antenna array, RF front end), with Party A's guidance;
Technical Specifications
Turntable load characteristics meet the size and weight requirements of mounted equipment, and after full vehicle assembly, ensure antenna equipment meets the following indicators (servo turntable operation):
a. Rotation range:
Azimuth: -180° to +180° (continuous rotation possible);
Pitch: 0° to 90° (antenna array surface vertical is 0°, horizontal upward is 90°);
b. Drive speed:
Azimuth: low speed ≤0.1°/s, high speed ≥36°/s, continuously adjustable;
Pitch: low speed ≤0.1°/s, high speed ≥3°/s, continuously adjustable;
c. Maximum drive acceleration:
Azimuth: ≥10°/s²;
Pitch: ≥1.5°/s²;
d. Pointing error:
Azimuth: ≤0.1° (R.M.S.);
Pitch: ≤0.1° (R.M.S.);
e. Tracking accuracy:
Tracking accuracy ≤0.1° (R.M.S.);
f. Back lobe antenna deployment angle:
Back lobe antenna deployment angle 65°±1°;
g. Display resolution:
Display resolution ≤0.01° (same for azimuth and pitch);
h. Power supply:
Power: 220±10% V, 50±5% Hz;
Turntable power consumption: ≤20 kW;
i. Antenna array surface rigidity requirements:
Antenna mounting surface deformation: ≤0.8 mm (R.M.S.);
In any working state, the maximum deformation vector sum of the antenna array frame does not exceed 2 mm;
Under any working and transportation conditions, the structural stress shall not exceed one-third of the material's yield strength.
j. Turntable control and drive equipment:
Installed inside the equipment cabin.
k. Automatic deployment and retraction time:
Both less than 5 minutes (Deployment: the entire process from stopping and leveling to the turntable reaching any preset angle; Retraction: the entire process from any working state to travel state) (operated by one person).

Figure 1 Working state schematic diagram
To avoid imbalance of the entire system caused by load center of gravity shift during azimuth rotation, the center of gravity of the azimuth platform and upper equipment shall be within 150mm from the azimuth rotation center.
Previous Page
Next Page
Previous Page
Next Page
Leave a Message Consultation
If you are interested in our products, please leave your contact information, and we will contact you as soon as possible. Thank you!